https://www.sciencedirect.com/science/article/pii/S1383586620323534
Abstract
Although the catalytic activation of persulfate by iron is now common in environmental sciences, there are still several obstacles, including the non-selectiveness and high cost of the production of the iron catalyst. Therefore, it is essential to develop fast and easy methods for producing an iron catalyst that exhibits high surface area properties and rapid catalytic activation of persulfate. In the present work, a chitosan-poly(3–hydroxybutyrate) conjugate (CS-PHB) was used to improve the synthesis of nanoscale zero-valent iron (nZVI). CS-PHB possesses among others two functional groups (carbonyl and amine) that are desirable for catalytic applications, including heterogeneous persulfate activation. The produced CS-PHB-nZVI particles showed an extensive surface area (113 m2/g) and, at the same time, superior activity in heterogeneous catalysis, which was tested and compared with others persulfate activation methods (heat, Fe2+, commercial nZVI). The most suitable activation conditions for complete degradation of 0.15 mM of the model pollutant (methyl orange; MO) were determined (i.e., a pH of 7, persulfate and CS-PHB-nZVI concentrations of 2 mM and 50 mg/L, respectively). The role of temperature in MO oxidation was evaluated by the Arrhenius equation, and the results showed that the estimated activation energy (Ea) was 27.1 kJ/mol. The MO degradation may be attributed to the generation of SO4− in the system as a result of scavenging tests. A magnet can be used to easily separate the remaining catalyst. It is believed that due to it having several advantages over traditionally used nZVI, CS-PHB-nZVI may be successfully applied for catalytic remediation of contaminants that are reactive towards sulfate radicals.